Soil sample ring 100 cm³

The soil sample ring with an inner volume of 100 cm³ has an internal diameter of 57 mm and is 40.5 mm high. The cutting edge on the lower side makes it easier to push the ring into the soil and reduces the disturbing effects. It is made of rust free stainless steel, is tough and durable. The soil sample rings are not numbered as standard. At customer request a continuous or customized numbering can be attached.

Soil sample ring 250 cm³

Using these soil sample rings undisturbed samples may be obtained with a volume of 250 cm³ which are suitable for laboratory research. The inner diameter is 72 mm, and the height is 61 mm. A cutting edge on the bottom side facilitates pressing into the soil and reduces the disturbing effects. It is made of rust free stainless steel, is tough and durable. These soil sample rings are closed or come with two side holes so that they may be inserted directly into the ku-pF apparatus in order to determine the soil hydraulic properties.
The soil sample rings are not numbered as standard. At customer request a continuous or customized numbering can be attached.

Soil sample ring 1140 cm³

These sample rings allow an extremely large sampling volume.  The inner diameter of the sample is 110 mm.
At the sample rings V2A stainless steel is the outer diameter 114 mm and sample height are each 120 mm and at the plexiglass sample rings is the outer diameter 120 mm and sample height are each 120 mm. They are suitable for use with sampling equipment for the excavation of undisturbed samples with a sample ring from UGT GmbH. When using plexiglass sample rings with the sampling equipment, a stainless steel cutting ring is put on the rings to support the cutting effect.

Soil sample ring 21 cm³

These miniature sample rings have been designed specifically for sampling larger sample rings and should be used with the sampling equipment for undisturbed sample ring testing from UGT GmbH.  They are made of plexiglass, and the height and inner diameter of the sample ring each measure 30 mm.

Technical Data Soil Sample Rings

Technical Data Lids

Driving hammer

• Driving hammer for 100 cm³ for soil sample rings with Ø60 mm (Part No.: 2300600)
• Driving hammer for 100 cm³ for soil sample rings with Ø54 mm (Part No.: 2300605)
• Driving hammer for 250 cm³ for soil sample rings with Ø76 mm (Item No.: 2300610)
• Driving hammer for 250 cm³ for soil sample rings with Ø84 mm (Item No.: 2300615)

Soil sampler

• 100 cm³ soil sampler for soil sample rings 40.5 mm high, Øi56 mm (Item No.: 2351000)
• 100 cm³ soil sampler for soil sample rings 51 mm high, Øi50 mm (Item No.: 2351100)
• Soil sampler, 250 cm³, for soil sample rings 61 mm high, Øi 72 mm (Item No.: 2351100)

Carrying case

• Carrying case for UGT soil sample rings, 100 cm³, holds up to 20 pieces (height 40.5 mm, Øi 57 mm) (Item no.: 2300510)
• Carrying case for UGT soil sample rings 100 cm³, holds up to 36 units (height 40.5 mm, inner diameter 57 mm) (Item no.: 2300620)

• Datasheets Soil Sample Rings